Connect with us

Automotive

Retrofitting of Undersea lithium Batteries in RVs

Published

on

Retrofitting of Undersea lithium Batteries in RVs

Retrofitting of Undersea lithium Batteries in RVs  – Sufficient electricity and energy create more comfort when traveling.

The stronger the battery in the camper, the more independent you are from campsites, and you can stay where you like it best – with ice-cold drinks, lights, and atmospheric music.

The pre-installed batteries often do not provide the necessary power for the desired comfort. That’s why we offer you high-quality and powerful RV batteries for even more independence when traveling.

 

What is the advantage of a lithium battery?

Lithium-ion batteries have decisive advantages over conventional battery variants.

Classic AGM or gel batteries must be recharged at the latest after 60% of the nominal capacity has been used to avoid a significant reduction in the battery life.

This partially discharged state does not harm a lithium battery. It can be recharged at any time or stored partially discharged, and 100% of the capacity supplied can be used.

lithium Batteries in RVs

The advantages at a glance:

  • No damage from partial discharge
  • 100% of the rated capacity usable
  • High vibration resistance
  • Lightweight
  • Low self-discharge
  • Ideal for high short-term loads (e.g., maneuvering aids)

For all these reasons, a 12v lithium ion battery is the number one choice today when looking for a heavy-duty caravan battery.

This is how you benefit from the premium series of lithium batteries.

As a partner for professional caravan equipment, we offer our customers a selection of high-quality lithium batteries that are characterized by maximum reliability in various areas of application.

These are the most important features of the innovative lithium-ion batteries:

Peak currents

Lithium batteries are real energy miracles. They provide peak currents of 200A continuous and 400A. As a result, the nominal capacity is never fully exhausted, which noticeably extends the battery’s life.

Full use of capacity

While conventional batteries must be recharged before half the nominal capacity is reached, you can use 100% of the specified capacity with the premium battery series.

Multi-charge mode

Thanks to the integrated multi-charge mode, you can continue to use almost all devices, such as solar battery chargers or solar controllers. This saves you additional costs. The manufacturer’s guarantee is retained for new vehicles.

App-based control

Lithium-ion under-seat batteries are optionally available with a 500A battery monitor with the shunt. This allows you to use the app to display the actual level in real-time.

High protection class

The battery housing is the neuralgic point where moisture quickly penetrates when wet. Our premium batteries are IP67-protected and can be used in humid climates without any problems.

Integrated security

Our undersea caravan batteries impress with their built-in full protection. The BMS system secures the battery and ensures it can be used safely anywhere.

lithium Batteries in RVs

More performance and sustainability with the Big Power Prismatic Cells (PPS)

There is a high-performance loss with standard batteries because many small cells are connected.

On the other hand, Premium batteries consist of fewer but larger and more powerful battery cells. More power comes out of the battery, with a higher level of safety and a longer lifespan.

Further advantages of the undersea battery at a glance:

Less space required

The battery can easily be installed under the seat and optimizes the available space. In addition, the weight is noticeably lower than with conventional or pre-installed caravan batteries.

Easy assembly

Only a small installation effort is required to convert the battery, which causes neither a lot of time nor high costs. The investment pays for itself quickly through more power and longer service life.

High security & reliability

A high level of safety characterizes the under-seat batteries with 12v lithium battery, 24v, 48v lithium ion technology.

An integrated BMS system protects the battery from overloading, deep discharge, overvoltage, and short circuits.

lithium Batteries in RVsYou know the state of charge of your battery in real-time.

How long can we stay in nature before the battery needs to be recharged? This question is answered by an app-based system that sends an accurate charge status display to your smartphone.

You get exact data about the current state of charge, the remaining battery life, and other historical data.

The information transfer takes place via Bluetooth. Even if you have multiple batteries in use, all data is sent to an app.

Another feature: You can read information and make individual settings via the app.

For example, you have the option of using this function for your further travel planning and can decide when the next charging station needs to be headed for.

Especially for undersea installation: Special solutions from Forster

Space is a valuable commodity when traveling with a caravan. We offer special undersea batteries that rely on tried-and-tested lithium-ion technology to use this space optimally.

The batteries are either under the driver’s or passenger’s seat.

You can choose between different capacities:

  • 100Ah
  • 150Ah
  • 200Ah
  • 280Ah
Retrofitting of Undersea lithium Batteries in RVs

Retrofitting of Undersea lithium Batteries in RVs

The under seat batteries offer you these advantages:

Integrated emergency switch

You can disconnect the battery from the caravan supply with a single click. Perfect for emergencies or winter storage of the caravan.

Accurate assembly

The shape and size of the batteries are ideal for installation in the seat console. They can be installed quickly and easily.

Change your car battery yourself.

There are only a few steps to changing the battery, but you should follow the sequence to avoid unwanted damage to the car.

Make sure the car is level, and the handbrake is on. In most models, the car battery is located under the hood at the front of the car.

Sometimes this is also protected by a cover. You can easily remove it with the right screwdriver.

There are also vehicles where the starter battery is installed in the trunk. If you can’t find the battery, look it up in your vehicle’s manual.

1st step: Remove the defective battery

Unless the battery was installed with a cover, start by removing the cables. First, the black negative cable is disconnected from the battery.

With a suitable ring wrench or open-end wrench, loosen the screw on the pole clamp of the black cable and then pull the clamp off the negative pole. Now it’s the red cable’s turn. Disconnect that too.

Now loosen the bracket that holds the battery in position. Usually, this is a metal bracket on top of the battery or a clamp on the bottom strip.

The battery can now be lifted out – be careful. Car batteries are very heavy!

2nd step: Install a new car battery

The dimensions of the new battery should match the old model so that it can easily be accommodated.

If there is dirt, such as leaves and other unwanted material, in the battery compartment, remove it before inserting the new battery.

Now insert the new car battery. It is important to ensure that the battery is installed in the correct direction, as the leads to the battery poles are tight.

Now the battery holder is attached and screwed.

3rd step: connect the car battery

First, carefully clean the connection terminals and the battery poles of adhering pole grease, dirt, and corrosion, e.g., using a wire brush.

Terminal grease and dirt do not conduct electricity and could seriously impair the electrical contact between the terminal clamps and the battery terminals.

Now the cables are connected to the new battery. However, the connection sequence is reversed to that when removing!

First, connect the red cable to the positive pole, then the black cable to the negative pole.

If you are no longer sure where the plus and minus poles are on the battery, look at the battery, there is a + and a – sign on the plastic.

In addition, the positive pole has a larger diameter, so accidentally attaching the negative cable to the positive pole is almost impossible.

After (!) tightening, some pole grease should be applied to the pole clamps and battery poles to protect against moisture and corrosion.

Finally, attach the terminal covers, which protect against short circuits.

Related CTN News:

Making Cambodian Cities Better: How Prince Group’s Chen Zhi Responded to Cambodia’s Urbanization Needs

What Services You’ll Need for Your Construction Company

What Are The Basics Of Organising The Hybrid Events?

Continue Reading

Automotive

Russell’s early departure leaves Lando Norris on pole at the Hungarian F1 GP.

Published

on

By

Lando Norris

(CTN News) – Lando Norris and his McLaren squad survived a tough qualifying session for the Hungarian Grand Prix, but they know they must perform on Sunday.

Lando Norris needed to win Budapest after Oscar Piastri locked off the top row in the field’s fastest McLaren. Recent races have been costly owing to wasted opportunities and little mistakes.

He matched Max Verstappen’s pole lap at the Hungaroring, who was unhappy to finish third. In a confident and aggressive approach, the 24-year-old finished more than three tenths ahead of the Dutchman, hitting the apexes.

Piastri followed Lando Norris by two hundredths of a second on the second hot run, demonstrating McLaren’s speed.

McLaren is doing well since Lando Norris won the Miami Grand Prix.

His potential triumphs have been cost by team and driver error, for which both parties have taken responsibility. On Sunday, he and McLaren will know they must do well.

Norris was quietly pleased with his historic first pole in Hungary and third overall. Although confident, McLaren will also be proud of their recent race progress. No one has won the pole in Budapest since Lewis Hamilton won the race and flag in 2012.

Norris and his crew recognize they must capitalize on closing gaps with 12 races left to drive Verstappen to the finish. Lando Norris understands. Behind Verstappen by 84 championship points.

“I know we missed out on some races, but we did the best we could in every one of them, and I don’t want to get back into all that stuff,” he said. I expect Oscar and Max to challenge me in the rear, not a clean weekend.

“Every location and point must be maximized; the more we can do to return to Max and Red Bull, the better.”

Hungary is a great opportunity since Lando Norris Verstappen was plainly unhappy with his car and outperformed. This disappointed him twice because the team had swiftly upgraded this race.

Verstappen had stated that the upgrades will define the second half of the season, but he admitted that he did not think they had gone far enough and could not defeat the McLarens.

“The changes are effective, but we still need more as we are not at the top,” said he. “Despite the imbalance, I liked the laps. I was pushing hard, so you had these little moments. Fast lap times are less crucial today. Simple: we need to work more because we’re moving slower. McLaren’s qualifying performance suggests a lot of ground to cover.

Lando Norris completed his best lap despite two crash-related stoppages.

Verstappen looked great in dry Q3 hot laps. He set a record with a lap time of 1 minute, 15.555 seconds and was quickest through each sector.

Lando Norris followed and pushed through the corners with fearlessness, posting a perfect 1:15.227 lap time. Piastri improved to second place on the penultimate laps while Verstappen did not, and Yuki Tsunoda’s crash halted the session.

A tardy coda didn’t matter when practice resumed because the last two minutes on old tires were worthless. McLaren has all the cards, but they must perform at the highest level to prove the legendary brand can win again.

Carlos Sainz of Ferrari was fourth and Lewis Hamilton of Mercedes fifth. George Russell, Sainz’s teammate, was unexpectedly ousted in the first round.

Sergio Pérez of Red Bull struggled again in the first qualifying round. He hit the curb, lost the rear at turn eight, and crashed, interrupting the session.

Poor performance again for the Mexican, whose Red Bull berth is in risk after a succession of poor performances, especially in qualification. His contract, recently extended to 2025, may have a performance clause, and Red Bull is unlikely to tolerate him underperforming for long. He was sixteen.

Russell fell behind because Lando Norris Mercedes didn’t fuel the car until the session ended. The British driver was eliminated in 17th place after staying out when the track dried after the break.

Charles Leclerc of Ferrari placed sixth, Fernando Alonso and Lance Stroll of Aston Martin placed seventh and eighth, Daniel Ricciardo of RB placed nine, and Tsunoda placed tenth.

Nico Hülkenberg and Kevin Magnussen of Haas finished 11 and 15, Valtteri Bottas of Sauber 12 and Alex Albon and Logan Sargeant of Williams 13 and 14. Esteban Ocon and Pierre Gasly placed ninth and twentieth for Alpine, while Guanyu Zhou placed eighth for Sauber.

SOURCE: GN

SEE ALSO:

Based on interest from The Range, Homebase’s owner plans to initiate a sale.

Inflation slowed in July, which will lead to 150 bps policy rate cuts, JS Global says.

Police in Chiang Rai Launch Crackdown on Cyber Criminals in Golden Triangle

Continue Reading

Automotive

M5 Partially Closed as Cullompton-Exeter Crash Hospitalizes Two

Published

on

By

M5

(CTN News) – Two people were sent to the hospital for treatment as a result of the M5 tragic vehicle accident that happened in Devon.

The accident between two vehicles was the cause of the disaster. One more consequence of the crash is that it has left the M5 partially blocked to traffic to this day.

Between junction 28 for Cullompton and junction 29 for Exeter, the highway was blocked in both directions; however, one lane on the southbound carriageway has been opened up for previously closed traffic.

In a statement issued by the South Western Ambulance Service NHS Foundation Trust, they stated that they were notified of a traffic accident that had happened in the Exeter district at 2:29 p.m. on Friday, July 12.

M5 happened in Exeter, according to reports.

Furthermore, information was given to them by the South Western Ambulance Service.

To provide medical assistance to those injured, four land ambulances, each with two crews, an air ambulance, a critical care M5 vehicle, a doctor, an operations officer, and a responding officer were dispatched to the scene of the incident.

Furthermore, a critical care vehicle was dispatched. We also dispatched an air ambulance to the scene of the event.

Two patients were transported to their respective hospitals: one was transported by land ambulance to the Royal Devon and Exeter Hospital, while the second patient was flown there by air ambulance.

After being moved, the two patients were sent to hospitals in Devon and Exeter, respectively. Simultaneously, both patients were transferred to their respective sites at the same time.

Here’s what Devon and Somerset M5 Fire and Rescue Service said:

“We responded to the scene of a road traffic collision on the M5 at 2.30 p.m. today, between junctions 28 and 29.” The statement cited above was part of an official declaration.

A car that had been hit by another car coming from the other direction had two persons inside that had been rescued. It had been traveling in the other direction.

We offered support as the people were being taken out of the car. These people are now receiving medical assistance from the ambulance service in order to fulfill their duties.

The event caused significant delays for the M5 and the routes that pass through Exeter during the period when traffic was being redirected. In order to accommodate the traffic, this was being done.

A southbound vehicle experienced wheel failure, causing it to cross the center reserve and merge with the northbound road approaching. The car was going the wrong way, which is why this happened. The vehicle was traveling southward at that precise moment.

National Highways indicated that based on the facts they have provided, it is expected that the police would begin their investigation into the occurrence given the magnitude of the calamity that occurred. The entity that made this information public was National Highways.

The Devon and Cornwall Police Department issued the following statement:

“We know the M5 closure is causing traffic.”

The statement that was released is located beneath you. “We will get people moving safely when we can but please bear with us while we deal with the incident and causalities at the scene.”

In order to accommodate cars and other small vehicles that were traveling on the now-closed northern route towards M5 Taunton and Bristol, the back of the line has been shifted.

This was done to create space for these cars, which were heading towards Taunton and Bristol. The purpose of this activity was to provide space for larger cars. At this point, it seems like more and more vehicles are being stopped from going forward.

Due to this incident, a second lane has been opened up for use by any and all vehicles traveling southward.

SOURCE: ITV

SEE ALSO:

Honda to Cease Production at One of its Thailand Auto Factories

Car Dealers in Northern Thailand Struggling to Stay Afloat

BYD Car Buyers in Thailand Outraged Over Huge Dealer Discounts

Continue Reading

Automotive

Honda to Cease Production at One of its Thailand Auto Factories

Published

on

By

Honda

(CTN News) – The Japanese vehicle firm Honda Motor made the news in a statement that was posted on Tuesday. The statement stated that the company intends to center its production at the site that it operates in the province of Prachinburi.

As a consequence of this, the production of automobiles will be halted at the facility that it operates in the province of Ayutthaya in Thailand by the year 2025.

The more difficult circumstances that the second-largest car manufacturer in Japan is facing in the country of Thailand, which is located in Eastern Southeast Asia, are exemplified by this move. Thailand is located in Southeast Asia.

There are several reasons for this, including the fact that Chinese firms are determined to grow their market share in Thailand, and a growing number of consumers are expressing an interest in electric vehicles (EVs). They both play a role in contributing to the problem.

The combined output of automobiles produced by Honda’s two facilities has fallen throughout the course of the succeeding four years, going from 228,000 vehicles in 2019 to less than 150,000 vehicles annually. This downward trend has occurred during the course of the past four years.

The preceding four years have been the time period during which this decline has taken place. With regard to the sales that the company has made in Thailand throughout the course of the past four years, there has been a consistent range of less than 100,000 to less than 100,000 for the entirety of this time period.

This is according to Honda’s spokeswoman.

When the factory first opened its doors in 1996, the company anticipates that it would continue to manufacture vehicle components at that location. When the firm finishes manufacturing vehicles at the Ayutthaya facility in the next year, the spokesperson stated that the company intends to continue producing automobile components at the plant.

In accordance with the statement that was given by the spokesman, the Prachinburi factory, which was built in 2016, will be utilized for the purpose of integrating the facilities with which automobiles are created. This was said in the statement. There are only two factories in Thailand that are owned and operated by the vehicle manufacturer, and these two factories are the only ones in the country.

According to the statement made by a spokeswoman for Honda in Thailand, the company’s goal is to reduce the disparity between the number of automobiles it produces and the number of sales it has experienced in the nation.

According to the remark that was made by the spokesman for the company, the automobile manufacturer are already exporting their products from Thailand, particularly to other Southeast Asian countries such as Indonesia and the Philippines. According to a statement that was sent by a spokeswoman for the company.

Currently, Honda has no plans to invest in Thailand.

When it comes to mainland China, Honda and Nissan Motor, a Japanese automobile manufacturer that competes with Honda, have been hit particularly hard by competition from rising Chinese manufacturers.

Nissan Motor is a competitor of Honda. As a result of the fact that these businesses provide reasonably priced plug-in hybrids and electric vehicles that are loaded with software, a significant number of customers have been drawn to them.

Now, Japanese automobile manufacturers are at risk of losing clients in countries outside of China, such as those in Southeast Asia, to Chinese companies that are increasingly attempting to increase the quantity of automobiles they export and build up operations outside of China.

As a result, Honda Japanese automobile manufacturers are facing a potential loss of customers. They are exposed to this danger as a result of the fact that Japanese brands compete with Chinese brands in these locations.

BYD, a Chinese manufacturer of electric vehicles, recently launched a plant in Thailand that will be responsible for the production of automobiles that are powered by electronic batteries.

This plant was established last week. The Chinese electric car manufacturers are beginning to establish facilities in the country, and this factory is a component of the wave of investments that they are making in the country. These investments have a total value that is greater than 1.44 billion dollars together.

SOURCE |SCMP

SEE ALSO:

Car Dealers in Northern Thailand Struggling to Stay Afloat

BYD Car Buyers in Thailand Outraged Over Huge Dealer Discounts

The PM Seeks Assurances after BYD’s Steep EV Discounting in Thailand Sparked Backlash

Continue Reading

Trending